|
|
|
|
德纳科Dynalco公司控制仪表速度开关和速度变送器
Dynalco Speed Switches & Speed Transmitters
Dynalco设计和制造高度工程坚固，可靠的，第三方的监测，控制和往复式发动机，蒸汽涡轮机，燃气涡轮机，泵和输送系统的保护认证仪表。我们为一个在石油和天然气，化工/过程，建筑业及越野设备，交通运输，发电，船舶，采矿，水和废水市场的客户和工厂自动化等。
SST-2000A和SST-2000H系列速度开关/变送器
SST-2000A and SST-2000H Series Speed Switch/Transmitter
SST-2000A和SST-2000H系列速度开关/变送器接收来自无源或有源磁性传感器、轴编码器、触点闭合器、流量计等的信号输入，以提供比例模拟输出和0、2或4继电器跳闸设定值。
SST-2000A and SST-2000H Series Speed Switches/Transmitters receive signal input from a passive or active magnetic pickup, shaft encoder, contact closure, flowmeter, etc., to provide proportional analog outputs and either 0, 2, or 4 relay trip setpoints.
Speed Transmitter and Switches
SST-2000 Series
Description
SST-2000A Speed Transmitter
SPEED TRANSMITTER, CSA General Classification and CE approved
Receives signal input from a passive or active magnetic pickup, shaft encoder, contact closure, flowmeter, etc. to provide proportional analog outputs.
The SST-2000A/H Speed Transmitter series is a highly configurable product.
SST-2000H Speed Transmitter
SPEED TRANSMITTER: CSA: Cls I, Div 2, Grp C,D
Receives signal input from a passive or active magnetic pickup, shaft encoder, contact closure, flowmeter, etc. to provide proportional analog outputs. Approvals: CSA and CE approved.
The SST-2000A/H Speed Transmitter series is a highly configurable product.
SST-2200A Speed Switch
SPEED SWITCH: over/under speed protection, transmitter with 2 standard relay setpoints, CSA General Classification
The SST-2200A has 2 relay setpoints and receives signal input from a passive or active magnetic pickup, shaft encoder, contact closure, flowmeter, etc. to provide proportional analog outputs. Approvals: CSA, CE approved.
The SST- 2000A/H Speed Switch series is a highly configurable product.
SST-2200H Speed Switch
SPEED SWITCH: over/under speed protection, transmitter with 2 sealed relay setpoints, CSA: Cls I, Div 2, Grp C,D.
The SST-2200H has 2 sealed relay setpoints and receives signal input from a passive or active magnetic pickup, shaft encoder, contact closure, flowmeter, etc. to provide proportional analog outputs. Approvals: CSA, and CE approved.
The SST-2000A/H Speed Switch series is a highly configurable product.
SST-2400A Speed Switch
SPEED SWITCH: over/under speed protection, transmitter with 4 standard relay setpoints, CSA General Classification
The SST-2400A has 4 relay setpoints and receives signal input from a passive or active magnetic pickup, shaft encoder, contact closure, flowmeter, etc. to provide proportional analog outputs. Approvals: CSA General Classification, and CE approved.
The SST- 2000A/H Speed Switch series is a highly configurable product.
SST-2400H Speed Transmitter
SPEED TRANSMITTER CSA Class 1, Division 2, Groups C, D Approvals: CSA and CE approved.
The SST-2000A/H Speed Transmitter series is a highly configurable product.
Features
- Proportional outputs of either 4–20 mA (standard), 0–5 Vdc, or 0–10 Vdc are field selectable. Standard 0-1 mAdc meter output included.
- Models available with up to four alarm setpoints.
- Field-selectable frequency range.
- Field-adjustable sensitivity control.
- Field-programmable for many types of sensors, including contact closure input.
- Repeater output drives counters and self-powered digital tachometers such as Dynalco's SPD-100 and SPD-700.
- Regulated 14 Vdc output powers active pickups (e.g. M910), accessories, and digital meters such as DPM-105 or MTH-103D, and the 12 Vdc versions of the internally lighted SPD-100L and LST-100L.
- Alarms are field-configurable for DPDT (SST-2400 A or -H only), overspeed, underspeed, energize, de-energize, latch, auto-reset.
- Integral VERIFY, requires external meter. Permits viewing and setting of setpoint value without actuating the relays.
- Input Frequency: Full-scale values from 0–0.1Hz (6 pulses per minute) to 0–50,000 Hz.
- Function: Converts frequency input (speed, rate) into linear proportional dc output. Provides alarm setpoints for over- and underspeed control and for sequential, startup, and shutdown switching.
- Signal Sources: Includes magnetic pickups, ac generators, contact closures, photocells.
- Output Range Capability: Current source up to 50 mAdc output always included.
- Alarm Setpoints: Available with two or four relays. Also available with no relays
Applications
- Engines
- Machines
- I/P drivers
- Instrumentation
- Process control
- Recording
- Measurement
描述
SST-2000A 速度开关变送器
速度开关变送器，CSA总分类和CE认证
接收来自被动或主动磁拾取器、轴编码器、触点闭合、流量计等的信号输入，以提供比例模拟输出。
SST-2000A/H 速度发射器系列是一个高度可配置的产品。
SST-2000H 速度开关变送器
速度发送器：CSA：I类，2区，C、D组
接收来自被动或主动磁拾取装置、轴编码器、触点闭合、流量计等的信号输入，以提供比例模拟输出。认证：CSA和CE认证。
SST-2000A/H 速度发射器系列是一个高度可配置的产品。
SST-2200A 速度开关
速度开关：超速/欠速保护，带有2个标准继电器设定点的发射器，CSA通用分类
SST-2200A具有2个继电器设定点，并接收来自被动或主动磁拾取、轴编码器、触点闭合、流量计等的信号输入，以提供比例模拟输出。认证：CSA、CE认证。
SST- 2000A/H 速度开关系列是一款高度可配置的产品。
SST-2200H 速度开关
速度开关：超速/欠速保护，带有2个密封继电器设定点的发射器，CSA：Cl I，Div 2，Grp C，D。
SST-2200H 有两个密封的继电器设定点，并接收来自被动或主动磁拾取、轴编码器、触点闭合、流量计等的信号输入，以提供比例模拟输出。认证：CSA 和 CE 认证。
SST-2000A/H 速度开关系列是一种高度可配置的产品。
SST-2400A 速度开关
速度开关：超速/欠速保护，带有4个标准继电器设定点的发射器，CSA通用分类
SST-2400A具有4个继电器设定点，并接收来自被动或主动磁拾取、轴编码器、触点闭合、流量计等的信号输入，以提供比例模拟输出。认证：CSA通用分类和CE认证。
SST- 2000A/H 速度开关系列是一款高度可配置的产品。
SST-2400H 速度开关变送器
SPEED TRANSMITTER CSA 1类，2区，C、D组认证：CSA和CE认证。
SST-2000A/H 速度发射器系列是一个高度可配置的产品。
功能
- 4-20 mA（标准）、0-5 Vdc或0-10 Vdc的输出比例可现场选择。标准0-1 mA直流电表输出包括在内。
- 提供最多四个报警设定点的型号。
- 现场可选频率范围。
- 现场可调灵敏度控制。
- 适用于多种类型的传感器，包括接触闭合输入，可现场编程。
- 重复器输出驱动计数器和自供电数字转速表，例如 Dynalco 的 SPD-100 和 SPD-700。
- 调节后的14 V直流输出为活动拾音器（例如M910）、配件和数字仪表（如DPM-105或MTH-103D）以及内部照明的12 V直流版本SPD-100L和LST-100L供电。
- 警报可现场配置为DPDT（仅限SST-2400 A或-H），超速，欠速，通电，断电，锁定，自动重置。
- Integral VERIFY，需要外部仪表。允许查看和设置设定值而不执行继电器操作。
- 输入频率：0-0.1Hz（6脉冲/分钟）至0-50,000 Hz的全量程值。
- 功能：将频率输入（速度、速率）转换为线性比例直流输出。提供用于超速和欠速控制以及顺序、启动和停车切换的报警设定点。
- 信号源：包括磁电式拾音器、交流发电机、触点闭合、光敏电阻。
- 输出范围能力：电流源最高可输出50毫安直流电，输出始终包括在内。
- 报警设定点：可与两个或四个继电器一起使用。也可以不使用继电器。
应用
- 发动机
- 机器
- I/P 驱动器
- 仪器设备
- 过程控制
- 记录
- 测量
特征Features:
- The ultimate in Over/Under Speed Protection for your rotating equipment
- The SST-2000A/H Series Speed Switch/Transmitter is available in six variations:
Model |
No. of Setpoints |
Analog Outputs |
Third Party Certifications |
| SST-2000A |
0 |
2 Analog Ouptuts:
1) 0-1 mA Ouput
2) 4-20 mA Ouput or 0-5 VDC or 0-10 VDC (switch selectable) |
CSA: General Certification LR 92270
ABS: type approval
CE: 89/336/EEC, Light Industrial
CE: 72/23/EEC, Low Voltage Directive |
| SST-2200A |
2 |
| SST-2400A |
4 |
| SST-2000H |
0 |
2 Analog Ouptuts:
1) 0-1 mA Ouput
2) 4-20 mA Ouput or 0-5 VDC or 0-10 VDC (switch selectable) |
CSA: Class I, Div. 2, Grp. D, LR 45322*
CE: 89/336/EEC, Light Industrial
CE: 72/23/EEC, Low Voltage Directive |
| SST-2200H |
2 |
| SST-2400H |
4 |
| * Approval contingent upon housing an SST-2000H series device in a CSA-certified enclosure. |
SST-2200H Speed Switch/Transmitter
F-16 Frequency Generator/Counter
SW-100 Speed Switch
SWT-1000 Speed Switch/Transmitter
SW-50 Speed Switch
SWTD-1000 Speed Switch/Transmitter
SW-200B Speed Switch
SWT-2000 Speed Switch/Speed Transmitter
- DYNALCO SST-2000 Series Speed Switches/ Transmitters Product
SST-2000A Speed Transmitter
SST-2200A Speed Switch/Transmitter
SST-2400A Speed Switch/Transmitter
SST-2000H Speed Transmitter
MTH-103D Tachometer / Hourmeter / Overspeed Trip
The MTH-103D has been replaced by the MTH-103E
MTH-103E Tachometer / Hourmeter / Overspeed Trip
SST-2400H Speed Switch/Transmitter
|
Description |
 |
SST-2000A |
SPEED SWITCH: over/under speed protection, transmitter with 0 relay setpoints, CSA General Classification, Group C & D Approval. |
| |
SST-2200A |
SPEED SWITCH: over/under speed protection, transmitter with 2 standard relay setpoints, CSA General Classification |
| |
SST-2400A |
SPEED SWITCH: over/under speed protection, transmitter with 4 standard relay setpoints, CSA General Classification |
| |
SST-2000H |
SPEED SWITCH: over/under speed protection, transmitter with 0 relay setpoints, CSA: Cls I, Div 2, Grp C & D |
| |
SST-2200H |
SPEED SWITCH: over/under speed protection, transmitter with 2 sealed relay setpoints, CSA: Cls I, Div 2, Grp D |
| |
SST-2400H |
SPEED SWITCH: over/under speed protection, transmitter with 4 sealed relay setpoints, CSA: Cls I, Div 2, Grp D |
 |
F-16 |
INSTRUMENTATION: Signal Generator/Counter/Calibrator |
 |
SW-200B |
SPEED SWITCH: over/under speed protection, crank disconnect, speed monitoring, transmitter, 3 relay setpoints |
 |
SW-50 |
SPEED SWITCH: overspeed protection, alarm, 2 relay setpoints |
Dynalco Speed Switches & Speed Transmitters
Our speed switches and transmitters are available in a variety of forms. We offer DIN size, DIN Rail mount and the traditional brick style. With single to 4 relay outputs and third-party approvals we are able to handle any requirements you may have.
F-16 Frequency Generator/Counter
INSTRUMENTATION: Signal Generator/Counter/Calibrator Used to calibrate tachometers, digital s..
SST-2000A Speed Transmitter
SST-2000A Speed Transmitter
SPEED TRANSMITTER, CSA General Classification and CE approved. Receives sign..
SST-2000H Speed Transmitter
SST-2000H Speed Transmitter
SPEED TRANSMITTER: CSA: Cls I, Div 2, Grp C,D Receives signal input from a passive or a..
SST-2200A Speed Switch/Transmitter
SST-2200A Speed Switch/Transmitter
SPEED SWITCH: over/under speed protection, transmitter with 2 standard relay setpoints, CSA Gener..
SST-2200H Speed Switch/Transmitter
SST-2200H Speed Switch/Transmitter
SPEED SWITCH: over/under speed protection, transmitter with 2 sealed relay setpoints, CSA: Cls I,..
SST-2400A Speed Switch/Transmitter
SST-2400A Speed Switch/Transmitter
SPEED SWITCH: over/under speed protection, transmitter with 4 standard relay setpoints, CSA Gener..
SW-200B Speed Switch
SW-200B Speed Switch
The SW-200B provides reliable engine overspeed protection. It has three adjustable relay setpoint..
SW-50 Speed Switch
SW-50 Speed Switch
The SW-50 provides reliable engine overspeed protection and is fully field- programmable. It has ..
MTH-103E Tachometer / Hourmeter / Overspeed Trip
MTH-103E Tachometer / Hourmeter / Overspeed Trip
The MTH-103E is a newer version of the MTH-103D. The function, package size and wiring are..
PNT-202
PNT-202
PICKUP POWERED OVERSPEED TRIP: over/under speed protection, CSA: Cls I, Div 1, Grp A, B, C,D. ..
SST-7000 Digital Speed Switch
SST-7000 Digital Speed Switch
The SST-7000 digital speed switch transmits a pulse or frequency input to provide an accurate 4 – 20..
SST-7100 Digital Speed Switch
SST-7100 Digital Speed Switch
SST-7100 is a PC-programmable, din-rail mounted speed switch with 1 standard relay set-point to prot..
SST-7200 Digital Speed Switch
SST-7200 Digital Speed Switch
SST-7200 is a PC-programmable, DIN rail mounted speed switch with 2 standard relays to protect your ..
SST-7200D Digital Speed Switch
SST-7200D Digital Speed Switch
SST-7200D is a PC-programmable, DIN rail mounted speed switch with display and keypad programmabilit..
SST-7400 Digital Speed Switch
SST-7400 Digital Speed Switch
SST-7400 is a PC-programmable, DIN rail mounted speed switch with 4 standard relays to protect your ..
SST-7400D Digital Speed Switch
SST-7400D Digital Speed Switch
SST-7400D is a PC-programmable, DIN rail mounted speed switch with display and keypad programmabilit..
SST-2400H Speed Switch/Transmitter
SST-2400H Speed Switch/Transmitter
SPEED TRANSMITTER CSA Class 1, Division 2, Groups C, D Approvals: CSA and CE approved
如果需要技术咨询、产品询价、下单和索要产品技术资料，请与我们联络010-84282935。
|
