DYNALCO SST-2400A速度开关变送器
Dynalco SST-2400A Speed Switch Transmitter

Dynalco SST-2000A和SST-2000H系列速度开关/变送器接收来自无源或有源磁传感器、轴编码器、触点损耗、流量计等的信号输入，以提供比例模拟输出和0、2或4个继电器跳闸设定值。SST-2000A and SST-2000H Series Speed Switches/Trans-mitters receive signal input from a passive or active magnetic pickup, shaft encoder, contact losure,flowmeter, etc., to provide proportional analog outputs and either 0, 2, or 4 relay trip setpoints.

速度开关：过/欠速保护，带4个标准继电器设定点的变送器，CSA一般分类SPEED SWITCH: over/under speed protection, transmitter with 4 standard relay setpoints, CSA General Classification

SST-2400A有4个继电器设定点，接收来自无源或有源磁传感器、轴编码器、触点闭合、流量计等的信号输入，以提供比例模拟输出。批准：CSA一般分类和CE批准。SST-2400A has 4 relay setpoints and receives signal input from a passive or active magnetic pickup, shaft encoder, contact closure, flowmeter, etc. to provide proportional analog outputs. Approvals: CSA General Classification, and CE approved.

SST-2000A/H系列是一种高度可配置的产品。SST- 2000A/H series is a highly configurable product.

SST-2400A Speed Switch/Transmitter 资料下载

SST-2400A Speed Switch/Transmitter
资料下载:
SST-2400A Data Sheet
SST-2000 Manual
SST-2400A Agency Approval (CSA)
SST-2400A Agency Approval (ABS)

Product Code: SST-2400A

SST-2400A Speed Transmitter
SST-2400A速度变送器

SPEED SWITCH: over/under speed protection, transmitter with 4 standard relay setpoints, CSA General Classification
The SST-2400A has 4 relay setpoints and receives signal input from a passive or active magnetic pickup, shaft encoder, contact closure, flowmeter, etc. to provide proportional analog outputs. Approvals: CSA General Classification, and CE approved.
The SST- 2000A/H series is a highly configurable product.
速度开关： 超速/欠速保护，带有4个标准继电器设定值的变送器，CSA通用分类
SST-2400A具有4个继电器设定值，并接收来自无源或有源电磁传感器，轴编码器，触点闭合，流量计等的信号输入，以提供比例模拟输出。批准：CSA通用分类和CE批准。
SST-2000A / H系列是高度可配置的产品。

特征Features

-现场可选择4-20 mA（标准），0-5 Vdc或0-10 Vdc的比例输出。包括标准的0-1 mAdc仪表输出。
Proportional outputs of either 4–20 mA (standard), 0–5 Vdc, or 0–10 Vdc are fieldselectable. Standard 0-1 mAdc meter output included.
-带有多达四个警报设定点的型号。
Models available with up to four alarm setpoints.
-现场可选的频率范围。
Field-selectable frequency range.
-现场可调灵敏度控制。
Field-adjustable sensitivity control.
-可对多种类型的传感器进行现场编程，包括触点闭合输入。
Field-programmable for many types of sensors, including contact closure input.
-中继器输出驱动计数器和自供电数字转速表，例如Dynalco的SPD-100和SPD-700。
Repeater output drives counters and self-powered digital tachometers such as Dynalco's SPD-100 and SPD-700.
-有源传感器（例如M910），附件和数字仪表（例如DPM-105或MTH-103D）以及内部照明的SPD-100L和LST-100L的12 Vdc版本的稳压14 Vdc输出功率。
Regulated 14 Vdc output powers active pickups (e.g. M910), accessories, and digital meters such as DPM-105 or MTH-103D, and the 12 Vdc versions of the internally lighted SPD-100L and LST-100L.
-警报可针对DPDT（仅限SST-2400 A或-H），超速，欠速，通电，断电，闩锁，自动重置进行现场配置。
Alarms are field-configurable for DPDT (SST-2400 A or -H only), overspeed,underspeed, energize, de-energize, latch, auto-reset.
-集成验证，需要外部仪表。允许查看和设置设定值，而无需操作继电器。
Integral VERIFY, requires external meter. Permits viewing and setting of setpoint value without actuating the relays.
-输入频率：满量程值，范围为0–0.1Hz（每分钟6个脉冲）至0–50,000 Hz。
Input Frequency: Full-scale values from 0–0.1Hz (6 pulses per minute) to 0–50,000 Hz.
-功能：将频率输入（速度，速率）转换为线性比例直流输出。提供超速和欠速控制以及顺序，启动和关闭切换的警报设置点。
Function: Converts frequency input (speed, rate) into linear proportional dc output. Provides alarm setpoints for over- and underspeed control and for sequential, startup, and shutdown switching.
-应用范围：包括引擎，机器，I / P驱动程序，仪器，过程控制，记录，测量。
Applications: Includes engines, machines, I/P drivers, instrumentation, process control, recording, measurement.
-信号源：包括电磁传感器，交流发电机，触点闭合，光电管。
Signal Sources: Includes magnetic pickups, ac generators, contact closures, photocells.
-输出范围功能：始终包括高达50 mAdc输出的电流源。
Output Range Capability: Current source up to 50 mAdc output always included.
-警报设定点：可用于两个或四个继电器。也可不带继电器
Alarm Setpoints: Available with two or four relays. Also available with no relays