Dynalco PG-100 Pulser
Dynalco PG-100 Pulser脉冲发生器

PG-100每秒钟从集成的磁传感器（不包括）中产生60个脉冲。它使用可拆卸的锥形锁紧衬套直接安装在直径0.50至1.25英寸（1.27至3.18厘米）的轴上。信号直接馈入仪表，速度开关等。不需要外部电源。当没有外部装备时很有用。
The PG-100 generates 60 pulses per revolution from an integral magnetic pickup (not included). It mounts directly on 0.50 to 1.25 inch (1.27 to 3.18 cm) diameter shafts using a removable taper lock bushing. The signal feeds directly into meters, speed switches, etc. No external power is required. Useful when an external gear is not available.

PG-100 脉冲发生器

PG-100
PG-100 Pulser

Datasheets
Dynalco PG-100 Pulser Datasheet and Manual
Miscellaneous
Dynalco Rep Locator
Magnetic Pickup Look-up
Details

PG-100
PG-100 脉冲发生器

数据表
Dynalco PG-100 Pulser数据表和手册
Dynalco Rep定位器
磁性传感器
细节

Description
TACHOMETER: RPM pulser
"-1" tapped for 5/8x18 thread
"-2" tapped for 3/4x20 thread

描述
TACHOMETER：RPM脉冲
“-1”螺纹为5/8x18螺纹
“-2”螺纹为3/4x20螺纹

PG-100每秒钟从集成的磁传感器（不包括）中产生60个脉冲。它使用可拆卸的锥形锁紧衬套直接安装在直径0.50至1.25英寸（1.27至3.18厘米）的轴上。信号直接馈入仪表，速度开关等。不需要外部电源。当没有外部装备时很有用。
The PG-100 generates 60 pulses per revolution from an integral magnetic pickup (not included). It mounts directly on 0.50 to 1.25 inch (1.27 to 3.18 cm) diameter shafts using a removable taper lock bushing. The signal feeds directly into meters, speed switches, etc. No external power is required. Useful when an external gear is not available.

特征Features

当轴上没有可用齿轮从电磁传感器产生信号频率时，或者与安装带相关支架的齿轮或链轮相比，更方便地在传感器上滑动时，可以使用PG-100。具有适当间距的磁性传感器
The PG-100 can be used when a gear is not available on the shaft to generate a signal frequency from a magnetic pickup, or when it is more convenient to slip on theis transducer than to mount a gear or sprocket with associated bracket to hold the magnetic pickup with appropriate spacing.