|
Dynalco M203 Magnetic Pickup/Speed Sensor
Dynalco M203 电磁传感器/速度传感器
Dynalco Magnetic Pickups Dynalco Speed Sensors磁性传感器/速度传感器
Dynalc Passive Variable Reluctance -Ordinary Area
无源可变磁阻传感器-危险区域应用
该电磁传感器的齐纳限制输出使其本质安全并获得CSA认证。即使在低速时（<300 RPM），也可以产生输出（长达4.000英寸）和5 / 8-18螺纹。
The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 RPM), has a long reach 4.000 inches) and 5/8-18 thread.
大多数经过CSA认证的皮卡仅在作为特定认证系统或组件的一部分使用时才保留该批准。UL，CENELEC和某些CSA认可的传感器可与仪器一起使用。
Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation.
M203 Magnetic Pickup/Speed Sensor 
M203
M203 Magnetic Pickup/Speed Sensor
M203
M203 Magnetic Pickup/Speed Sensor
5/8-18 x 6" - 30" Leads
Passive (Variable Reluctance) - Hazardous Area
Ultra-High Sensitivity (min. Speed < 300 RPM)
Approvals
Dynalco CSA Approval for Intrinsically Safe and Non-Incendive Systems for Hazardous Locations
Datasheets
Dynalco M203 - 5/8-18 x 4" - 2 Pin - Zener-Limited Datasheet
Miscellaneous
Dynalco Rep Locator
Magnetic Pickup Look-up
Details
M203
M203电磁传感器/速度传感器
5 / 8-18 x 6“-30”引线
被动（可变磁阻）-危险区域
超高灵敏度（速度<300 RPM）
批准书
Dynalco CSA批准用于危险场所的本安和非易燃系统
数据表
Dynalco M203-5 / 8-18 x 4“-2针-稳压管有限数据表
Dynalco Rep定位器
磁性传感器
细节
5/8-18 x 6" - 30" Leads 5 / 8-18 x 6“-30”
Passive (Variable Reluctance) - Hazardous Area 被动（可变磁阻）引线-危险区域
Ultra-High Sensitivity (min. Speed < 300 RPM) 超高灵敏度（速度<300 RPM）
该电磁传感器的齐纳限制输出使其本质安全并获得CSA认证。即使在低速时（<300 RPM），也可以产生输出（长达4.000英寸）和5 / 8-18螺纹。
The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 RPM), has a long reach 4.000 inches) and 5/8-18 thread.
大多数经过CSA认证的皮卡仅在作为特定认证系统或组件的一部分使用时才保留该批准。UL，CENELEC和某些CSA认可的传感器可与仪器一起使用。
Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation.
|
